Apollo 55000-590APO XP95 Input/Output Module - Three Channel - Isolating

Apollo 55000-590APO XP95 Input/Output Module - Three Channel - Isolating

The Three Channel Input/Output module provides three  single pole, voltage-free, clean contact changeover relay  outputs with common, normally open and normally closed  terminals provided for field cabling, and three monitored  switch inputs. 

The inputs are monitored for short and open circuit conditions and are protected against accidental connection to the detection loop.

The device is loop-powered and incorporates bidirectional isolation circuitry to provide against detection loop short circuits. On-board LED status indication is provided for service and commissioning purposes, a feature that can be deactivated during normal operation to reduce the current draw on the system.

A 10-way DIP switch is provided to set the device address and LED control.

Key Features

Uses a single address

Built-in Short Circuit Isolator

3mm screw fixing (supplied) or DIN Rail mounting option

Diagnostic LED Indications

Monitored inputs