Aico Ei414 RadioLINK Fire/CO Alarm Interface Aico Ei414 RadioLINK Fire/CO Alarm Interface

Aico Ei414 RadioLINK Fire/CO Alarm Interface

The Ei414 Fire/ CO Alarm Interface provides either a wireless interface via RF or a hard wired interface via a link cable between a RadioLINK Alarm system and a Warden Call/ Telecare System.

The Ei414 decodes RF Fire and/ or CO signals from the RadioLINK and RadioLINK+ devices and activates the relevant onboard relays. The relays must be wired to the (universal) RF transmitters or via a special link cable to the Warden Call Systems. The Warden Call System in turn is programmed to perform the desired function, on receipt of these signals.

The Ei414 can deliver either a pulse signal or a continuous switched signal via the relays to the universal transmitters. The specific signal type will be determined by the requirement of the OEM universal sensor.

The Ei414 contains x3 mains rated relays (rated upto 250V AC / 5 Amps). The relay contacts operate on mains power or on battery back-up cells in the event of a mains failure.

The Ei414 has a key switch with 3 positions:

ON - Sends a signal from an Aico Alarm but not a Controller

TEST - Sends a signal from an Aico Alarm and Controller

OFF - No signal sent from an Aico Alarm or Controller

The Ei414 uses RadioLINK multi-repeater, multi-path technology to deliver very robust and reliable RF signal coverage. While designed primarily to interface with a Warden Call or similar Telecare system, the versatility of the Ei414’s electrically isolated contacts means it can be used to switch many other OEM devices.

Key Features

Connect your Smoke/ Heat and CO Alarms system to external devices e.g. Warden Call and other Telecare systems

Powered by either mains 240V AC or 10-30V DC external source

Rechargeable lithium cell back-up

Volt free contacts outputs (NO & NC) for Alarm (Fire & CO) messages and fault messages

3 position key switch

Clear Indicator LED’s

Contains for wireless communication with Alarms and Devices

Allows for simple testing of domestic and external systems

Connects wirelessly with all other Aico wireless interconnection products

Mains powered with rechargeable lithium cell back up

Interfaces with Telecare/Warden Call devices, Sprinkler systems and many more

Uses RadioLINK+ wireless interconnection technology to connect with domestic alarms and accessories